SmallNetBuilder Forums
Go Back   SmallNetBuilder Forums > LAN & WAN > Switches, NICs and cabling

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-31-2013, 12:35 AM
reb00tz reb00tz is offline
New Member
 
Join Date: Jan 2013
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
reb00tz is just starting out
Default Double Hop Over LACP-Enabled Switches?

Hi all,

Long time lurker, first time poster...

Just wondering if anyone has experience if 802.3ad/802.1ax/LACP/LAG (or one of the gazillion names) will work if it goes through a double hop involving two switches that are LACP enabled (i.e. the trunks are set up switch-to-switch).

In (horrible) ASCII art:

Code:
Laptop 1
        \
         \
          Switch 1 === (LACP trunk) === Switch 2 === NAS (also trunked)
         /
        /
Laptop 2
Reply With Quote
  #2  
Old 03-04-2013, 03:45 PM
bendsley bendsley is offline
Member
 
Join Date: Nov 2009
Posts: 49
Thanks: 0
Thanked 2 Times in 2 Posts
bendsley is just starting out
Default

LACP just aggregates the information going through the bonded ports...so any traffic going through from SWITCH 1 to SWITCH 2 will pass through to the NAS just fine...all bonded through LACP.

As long as SWITCH 1 and SWITCH 2 and NAS are all LACP, everything will work fine. If you only have SWITCH 1 and SWITCH 2 set to LACP, then obviously you will only get the bonded benefit between those two devices.

Remember though, you won't really see any benefit from your laptops as they are not LACP enabled. You are not going to be able to send a file any faster over the 1 gig link than you would over a 2 gig bonded link since you will be limited by your slowest connection.

Last edited by bendsley; 03-04-2013 at 03:47 PM.
Reply With Quote
  #3  
Old 03-14-2013, 11:47 PM
networkguy1 networkguy1 is offline
New Member
 
Join Date: Mar 2013
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
networkguy1 is just starting out
Default

Should not be a problem.. I have done this in Cisco lab environments many times. You can probably get the same setup on other managed siwtches.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


All times are GMT -4. The time now is 02:13 AM.


Top 10 Stats
Top Posters* Top Thanked
RMerlin  400
john9527  160
azazel1024  116
htismaqe  103
sfx2000  87
stevech  74
ColinTaylor  69
AndreyPopov  58
TonyH  54
bbb0777  42
RMerlin  6060
john9527  391
stevech  351
ryzhov_al  280
TeHashX  237
L&LD  232
RogerSC  201
sinshiva  147
sfx2000  134
joegreat  126
Most Viewed Threads* Hottest Threads*
Old Asuswrt-Merli...  29631
Old Brainstorming...  2683
Old RT-AC68P...  2671
Old Advice on...  2596
Old Looking for...  2361
Old RT-AC68U...  1898
Old Asus...  1816
Old Issues...  1779
Old Stable...  1683
Old AC-68...  1615
Old Asuswrt-Merli...  211
Old Advice on...  49
Old Brainstorming...  49
Old Looking for...  35
Old RT-AC68P...  32
Old WiFi...  27
Old Stable...  25
Old Issues...  25
Old WiFi Rates  23
Old RT-AC68U...  22


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
© 2006-2014 Pudai LLC All Rights Reserved.