Quote:
Originally Posted by howardg
This is my first post as a member and I am by no means a networking expert, so your patience would be appreciated. I just set up this router and it is working well. I added seven devices to the reserved IP address list using their mac addresses, including my NAS (A ReadyNAS Duo). I then shut all the devices down and restarted them. All the devices were assigned their reserved address except the NAS. I went ito the NAS control interface and clicked the button to "renew now" the IP address, and got a confirmation that the address was renewed. Nevertheless, when I check the router interface, it still has the same (non-reserved) address. What am I doing wrong?
|
Some NAS have more than just one network interface. Make sure you used the correct MAC address.
Also make sure you don't have any other device on your network running a DHCP server (such as an old router, or perhaps even the NAS itself, as some can run a DHCP server).
Router won't assign the IP addresses I have reserved
Linear Mode
