RT-n56u Access Point Issue
First off, this forum has been extremely helpful so far.
I have a Cable Modem from Time Warner going to a RT-AC66U. From there it goes out to several wired devices including a powerline adapter that goes upstairs. At the other end of that I want to place my old RT-N56U as an Access point. I set this up last night with the powerline adapter going into the WAN port. I set it up with a different SSID upstairs so I could check the connection and it will not provide an ip to any devices that connect. Shouldn't it be passing through the DHCP from the 66?
Failed to mention the firmware is .318
Last edited by connor2k; 01-17-2013 at 11:58 AM.
Reason: added firmware