SmallNetBuilder Forums
Go Back   SmallNetBuilder Forums > Wireless Networking > ASUS Wireless > Asuswrt-Merlin

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-20-2013, 06:47 PM
janosek janosek is offline
Senior Member
 
Join Date: Jan 2013
Posts: 128
Thanks: 18
Thanked 7 Times in 6 Posts
janosek is just starting out
Default two openvpn clients at the same time?

Has anyone gotten two openvpn clients working at the same time? I have one selectively routing devices on my RT-AC66U, but when I tried two, the second client seemed to take over. Any thoughts?
Reply With Quote
  #2  
Old 02-21-2013, 12:58 PM
jobongo jobongo is offline
Member
 
Join Date: Jan 2013
Posts: 62
Thanks: 2
Thanked 22 Times in 12 Posts
jobongo is just starting out
Default

Can you post your routing table and ip rules when both VPNs are up and running?

Code:
ip route show table main
Code:
ip rule show
Reply With Quote
  #3  
Old 02-22-2013, 01:11 PM
janosek janosek is offline
Senior Member
 
Join Date: Jan 2013
Posts: 128
Thanks: 18
Thanked 7 Times in 6 Posts
janosek is just starting out
Default

I will get back to you tonight.

In the mean time, I made a post here to see if anyone could help:
http://forums.smallnetbuilder.com/showthread.php?t=9481

If you scroll down and get past by current script, you will see my work in progress environment setup and wan-start. I will load it up again tonight and run those commands.
Reply With Quote
  #4  
Old 02-22-2013, 08:59 PM
janosek janosek is offline
Senior Member
 
Join Date: Jan 2013
Posts: 128
Thanks: 18
Thanked 7 Times in 6 Posts
janosek is just starting out
Default

So I was wrong. My internet doesn't work at all with that script version.

Code:
ip route show table main
10.162.1.1 via 10.162.1.9 dev tun0
10.170.1.1 via 10.170.1.9 dev tun1
46.19.141.166 via 24.212.140.129 dev eth0
10.162.1.9 dev tun0 proto kernel scope link src 10.162.1.10
10.170.1.9 dev tun1 proto kernel scope link src 10.170.1.10
50.7.32.50 via 24.212.140.129 dev eth0
24.212.140.129 dev eth0 scope link
24.212.140.128/27 dev eth0 proto kernel scope link src 24.212.140.142
192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1
127.0.0.0/8 dev lo scope link
0.0.0.0/1 via 10.162.1.9 dev tun0
0.0.0.0/1 via 10.170.1.9 dev tun1
128.0.0.0/1 via 10.162.1.9 dev tun0
128.0.0.0/1 via 10.170.1.9 dev tun1
default via 24.212.140.129 dev eth0

Code:
ip rule show
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 03:20 AM.

Top 10 Stats
Top Posters* Top Thanked
RMerlin  393
stevech  154
thelonelycode...  151
L&LD  125
azazel1024  119
KGB7  85
jim769  76
DrTeeth  69
Adamm  66
speedingcheet...  63
RMerlin  4480
stevech  275
ryzhov_al  199
TeHashX  194
RogerSC  166
L&LD  163
joegreat  105
jlake  101
PrivateJoker  93
sinshiva  88
Most Viewed Threads* Hottest Threads*
Old Asuswrt-Merli...  31342
Old ASUS...  21981
Old Asuswrt-Merli...  20136
Old Beta Version...  17439
Old 'Heartbleed'...  14085
Old Linksys...  9098
Old Potential...  7884
Old Asus-Merlin...  6967
Old Groundhog...  6378
Old Linksys...  5271
Old Asuswrt-Merli...  218
Old Asuswrt-Merli...  158
Old Linksys...  142
Old ASUS...  124
Old Beta Version...  112
Old Potential...  98
Old Linksys...  76
Old Groundhog...  49
Old Asus router...  43
Old USB drive...  38



Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
© 2006-2014 Pudai LLC All Rights Reserved.