SmallNetBuilder Forums
Go Back   SmallNetBuilder Forums > LAN & WAN > Routers

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-15-2013, 10:26 AM
Tesseract Tesseract is offline
New Member
 
Join Date: Jan 2013
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Tesseract is just starting out
Confused Expected wired speeds through wireless router?

I apologize if this is the wrong forum but I wasn't sure where to ask this question.

I have a very typical small home network. I am using a Linksys WRT54GL V1.1 for my wireless router. My main PC is connected to that router by wire. I have Comcast as my Internet provider and they have been upping my speed over the years. I recently received their latest modem as a free upgrade. I did a speed test using Speedtest.net on my PC directly wired to the new modem. No router. I was averaging about 75 Mbps. The new modem was about 3 times faster than my old one.

So, I connected my PC to the router and performed the same test. But, I was only getting about 20 Mbps. Roughly the same as I was getting with the wireless connection.

So, my question is what wired speeds should I be expecting through a wireless router? I just assumed that port was a pass through but obviously something in the router is slowing the wired speed down. Would a newer router help in regards to the wired speeds?

Thanks for any help!
Reply With Quote
  #2  
Old 01-15-2013, 01:43 PM
relax's Avatar
relax relax is offline
New Member
 
Join Date: Feb 2012
Location: The Hague, The Netherlands
Posts: 24
Thanks: 1
Thanked 3 Times in 3 Posts
relax is just starting out
Default

Needless to ask if you did the test toward the same server no...?

How many times did you repeat the test? Traffic on the network is always changing, therefore said measure is a stochastic variable, and a correct estimation of its value requires multiple measurements to have some meaning.

In my case the variance for the same server is rather large also with respect to the time of the day I measure.
Reply With Quote
  #3  
Old 01-15-2013, 02:03 PM
Tesseract Tesseract is offline
New Member
 
Join Date: Jan 2013
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Tesseract is just starting out
Default

Yes the test was to the same server. I repeated the test probably 4 or 5 times. These tests and the ones with the PC connected to the router were all done in a 2 hour period on a weekend morning. I doubt the traffic changed much.

Is there a limit to the speed you would expect on that router?
Reply With Quote
  #4  
Old 01-15-2013, 02:18 PM
thiggins's Avatar
thiggins thiggins is offline
Mr. Easy
 
Join Date: May 2008
Posts: 8,478
Thanks: 89
Thanked 452 Times in 387 Posts
thiggins is just starting out
Default

Yes, routers can limit the Internet speed to/from wired connections as well as wireless.

The WRT54GL is quite old and my tests found it had problems supporting high simultaneous up and downlink traffic.

Go get yourself a more current router and you will probably find the problem solved. Check the Router Charts and make sure you get a router with at least 75 Mbps WAN to LAN throughput.

Go buy another router
__________________
Tim Higgins
Managing Editor,SmallNetBuilder.com
Reply With Quote
  #5  
Old 01-20-2013, 03:59 AM
coolspot coolspot is offline
New Member
 
Join Date: Dec 2012
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
coolspot is just starting out
Default

Quote:
Originally Posted by Tesseract View Post
I did a speed test using Speedtest.net on my PC directly wired to the new modem. No router. I was averaging about 75 Mbps. The new modem was about 3 times faster than my old one.
WRT54GL's maximum routing speed is around 35 - 45 megabits/s (to the Internet).

Newer routers can do 100 mbit/s+... just check the router charts here:

http://www.smallnetbuilder.com/lanwa...er-charts/view

(LAN to WAN throughput).
Reply With Quote
  #6  
Old 01-20-2013, 12:50 PM
stevech stevech is offline
Very Senior Member
 
Join Date: Mar 2010
Location: San Diego
Posts: 4,002
Thanks: 1
Thanked 270 Times in 259 Posts
stevech is just starting out
Default

My WRT54G was found to be limiting the WAN side speeds (packets per second) when my ISP increased to 10-20Mbps (bursting). I replaced that many years ago and speeds improved noticeably. No doubt, the packets/sec rate is affected by how much packet inspection is needed based on your QoS and similar settings.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


All times are GMT -4. The time now is 06:10 AM.

Top 10 Stats
Top Posters* Top Thanked
RMerlin  315
L&LD  159
thelonelycode...  143
stevech  141
azazel1024  103
KGB7  64
Adamm  63
TeHashX  57
jim769  56
speedingcheet...  56
RMerlin  4368
stevech  270
ryzhov_al  199
TeHashX  191
RogerSC  164
L&LD  163
joegreat  104
jlake  98
PrivateJoker  93
sinshiva  85
Most Viewed Threads* Hottest Threads*
Old Beta Version...  16980
Old ASUS...  16150
Old Asuswrt-Merli...  15580
Old 'Heartbleed'...  12183
Old Potential...  7515
Old Groundhog...  5939
Old Asus-Merlin...  5789
Old Linksys...  4462
Old Linksys...  4386
Old [TUTORIAL]...  2655
Old Asuswrt-Merli...  144
Old Beta Version...  112
Old Linksys...  104
Old Potential...  98
Old ASUS...  93
Old Groundhog...  49
Old Asus router...  43
Old [TUTORIAL]...  39
Old Asus-Merlin...  35
Old 'Heartbleed'...  33



Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
© 2006-2014 Pudai LLC All Rights Reserved.