SmallNetBuilder Forums
Go Back   SmallNetBuilder Forums > Wireless Networking > ASUS Wireless > ASUS N Routers & Adapters

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-11-2013, 02:31 PM
othello othello is offline
New Member
 
Join Date: Jan 2013
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
othello is just starting out
Default VPN connect fine, no route to backend hosts

I have upgraded to firmware 3.0.0.4.260 and everything is fine, rock solid. I now want to try the VPN server so that I can get an RDP session from the Internet into a Windows 7 host on the local network. The VPN setup was quick and painless and my remote system (also Windows 7) has successfully made an encrypted connection to the VPN server.

I cannot see the local network hosts from the remote and pings fail to route. My routing table on the remote host looks like this when the VPN is active (edited):

================================================== =========================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.34 4245
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.33 4250
0.0.0.0 0.0.0.0 On-link 192.168.10.2 21
127.0.0.0 255.0.0.0 On-link 127.0.0.1 4531
127.0.0.1 255.255.255.255 On-link 127.0.0.1 4531
127.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
192.168.1.0 255.255.255.0 On-link 192.168.1.34 4501
192.168.1.0 255.255.255.0 On-link 192.168.1.33 4506
192.168.1.33 255.255.255.255 On-link 192.168.1.33 4506
192.168.1.34 255.255.255.255 On-link 192.168.1.34 4501
192.168.1.255 255.255.255.255 On-link 192.168.1.34 4501
192.168.1.255 255.255.255.255 On-link 192.168.1.33 4506
192.168.10.2 255.255.255.255 On-link 192.168.10.2 276
192.168.47.0 255.255.255.0 On-link 192.168.47.1 4501
192.168.47.1 255.255.255.255 On-link 192.168.47.1 4501
192.168.47.255 255.255.255.255 On-link 192.168.47.1 4501
192.168.56.0 255.255.255.0 On-link 192.168.56.1 4501
192.168.56.1 255.255.255.255 On-link 192.168.56.1 4501
192.168.56.255 255.255.255.255 On-link 192.168.56.1 4501
192.168.74.0 255.255.255.0 On-link 192.168.74.1 4501
192.168.74.1 255.255.255.255 On-link 192.168.74.1 4501
192.168.74.255 255.255.255.255 On-link 192.168.74.1 4501
192.168.86.0 255.255.255.0 On-link 192.168.86.1 4501
192.168.86.1 255.255.255.255 On-link 192.168.86.1 4501
192.168.86.255 255.255.255.255 On-link 192.168.86.1 4501
[X.X.Y.Y] 255.255.255.255 192.168.1.1 192.168.1.34 4246
224.0.0.0 240.0.0.0 On-link 127.0.0.1 4531
224.0.0.0 240.0.0.0 On-link 192.168.47.1 4502
224.0.0.0 240.0.0.0 On-link 192.168.86.1 4502
224.0.0.0 240.0.0.0 On-link 192.168.74.1 4502
224.0.0.0 240.0.0.0 On-link 192.168.1.33 4507
224.0.0.0 240.0.0.0 On-link 192.168.56.1 4502
224.0.0.0 240.0.0.0 On-link 192.168.1.34 4502
224.0.0.0 240.0.0.0 On-link 192.168.10.2 21
255.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
255.255.255.255 255.255.255.255 On-link 192.168.47.1 4501
255.255.255.255 255.255.255.255 On-link 192.168.86.1 4501
255.255.255.255 255.255.255.255 On-link 192.168.74.1 4501
255.255.255.255 255.255.255.255 On-link 192.168.1.33 4506
255.255.255.255 255.255.255.255 On-link 192.168.56.1 4501
255.255.255.255 255.255.255.255 On-link 192.168.1.34 4501
255.255.255.255 255.255.255.255 On-link 192.168.10.2 276
================================================== =========================

Both remote and local hosts have VMWare and VirtualBox installed that provide additional network segments, that's why there are "extra" local network segments there.

The VPN adapter Network Connection Details panel (General>Details):
Connection-specific DNS Suffix:
Description: HomeVPN
Physical Address: ‎
DHCP Enabled: No
IPv4 Address: 192.168.10.2
IPv4 Subnet Mask: 255.255.255.255
IPv4 Default Gateway:
IPv4 DNS Server: 192.168.1.1
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes

This looks odd, shouldn't the default gateway be the WAN address of the VPN Server? the Details tab for the VPN adapter does show that WAN address as the Destination address, however. Which settings can I adjust to get the routing correct so that I can connect to the local hosts?

I have seen oblique references in other (and older) threads to set up static routes but weren't much more specific. There's routing on the local host, the VPN Server/router, and the remote host. Which device gets the static routes? Should it be not necessary for this firmware release?

Any pointers appreciated.
Reply With Quote
  #2  
Old 01-11-2013, 07:03 PM
RMerlin's Avatar
RMerlin RMerlin is offline
Very Senior Member
 
Join Date: Apr 2012
Location: Canada
Posts: 8,453
Thanks: 43
Thanked 4,368 Times in 1,871 Posts
RMerlin is just starting out
Default

You need to configure the VPN IP block to be within the same network as your router (192.168.1.xxx). By default it uses 192.168.10.xxx, which would require you to start messing with static routes.
__________________
Asuswrt-Merlin: Customized firmware for Asus routers
Github: github.com/RMerl - Twitter: RMerlinDev
See the sticky post for more info.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 09:04 AM.

Top 10 Stats
Top Posters* Top Thanked
RMerlin  315
L&LD  159
thelonelycode...  144
stevech  141
azazel1024  103
KGB7  64
Adamm  64
speedingcheet...  57
jim769  56
TeHashX  55
RMerlin  4368
stevech  270
ryzhov_al  199
TeHashX  191
RogerSC  164
L&LD  163
joegreat  104
jlake  98
PrivateJoker  93
sinshiva  85
Most Viewed Threads* Hottest Threads*
Old Beta Version...  16985
Old ASUS...  16246
Old Asuswrt-Merli...  16088
Old 'Heartbleed'...  12224
Old Potential...  7522
Old Groundhog...  5946
Old Asus-Merlin...  5796
Old Linksys...  4538
Old Linksys...  4470
Old [TUTORIAL]...  2660
Old Asuswrt-Merli...  146
Old Beta Version...  112
Old Linksys...  104
Old Potential...  98
Old ASUS...  93
Old Groundhog...  49
Old Asus router...  43
Old [TUTORIAL]...  39
Old Asus-Merlin...  35
Old 'Heartbleed'...  33



Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
© 2006-2014 Pudai LLC All Rights Reserved.