I was reading TomatoUSB forum and saw a message regarding forwarding ports via UPnP. It seems is not allowed for ports below 1024. How both Merlin and Asus firmware handle this question?
- lfbb
__________________
[ Asus RT-N66U B1 Dark Knight | F/W: Asuswrt-Merlin 3.0.0.4.354.28 Beta 1 | CFE bootloader 1.0.1.3 ]
Asus also limits the lowest port to 1024 by default. You can override that either by using a custom miniupnp config file (in Asuswrt-Merlin) or by entering an nvram value that will override it (applies to both Asuswrt and Asuswrt-Merlin):
Quote:
nvram set upnp_min_port_int=1
nvram set upnp_min_port_ext=1
nvram commit
__________________
Asuswrt-Merlin: Customized firmware for Asus routers Github: github.com/RMerl - Twitter: RMerlinDev
See the sticky post for more info.
The Following User Says Thank You to RMerlin For This Useful Post:
Port limits for UPnP
Linear Mode
