I was wondering if it is possible to setup wireless WPA authentication on separate SSIDs in different bridges. I am trying to setup 2 SSID's in their own lan so that I can route traffic to two different default gateways. I can setup the separate LANs on 2 separate SSIDs with no problem. DHCP/DNS works and each SSID is on their own LAN. The problem arises when I turn on wireless security for the SSID in the new bridge. I cannot authenticate with the router. I can see the SSID and my laptop notices that authentication is required but doesn't authenticate. I used this guide here for DD-WRT http://www.pennock.nl/dd-wrt/Multiple_BSSIDs.html
but when I try and use some of the options , such as -p, I get "Command line parsing error: Quitting...... Here is my bridge setup. Wl0.1 is the guest SSID that I modified to direct traffic over a VPN that I connect to.
bridge name bridge id STP enabled interfaces
br0 8000.50465d6eaa70 yes vlan1 <----Default Bridge that uses original SSID
br1 8000.52465d6eaa71 no wl0.1 <----Extra bridge for VPN SSID
Is this a network access server (nas) issue? Is this even possible (I like to think that nothing is impossible) I looked at the source code and didn't see any settings that could be modified but then again I am no expert. If there is a change that I could compile myself that would be no problem. This is the only things standing in the way of me having my home network exactly the way I want it
Any help would be greatly appreciated. Thanks