SmallNetBuilder Forums
Go Back   SmallNetBuilder Forums > Wireless Networking > ASUS Wireless > Asuswrt-Merlin

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-29-2012, 05:48 AM
bigup bigup is offline
New Member
 
Join Date: Nov 2012
Posts: 11
Thanks: 12
Thanked 0 Times in 0 Posts
bigup is just starting out
Default 3.0.0.4.260 official to 3.0.0.4.246 merlin do i hav to clear NVRAM?

currently using 3.0.0.4.260 official and want to try 3.0.0.4.246 merlin

i plan to do this remotely (logmein) so need to do know i have to clear NVRAM for this downgrade?

ive done 3.0.0.4.260 official to 3.0.0.4.260 merlin remotely and it worked but wasn't to sure about downgrading to custom firmware

thanks
Reply With Quote
  #2  
Old 11-29-2012, 10:02 AM
RMerlin's Avatar
RMerlin RMerlin is online now
Very Senior Member
 
Join Date: Apr 2012
Location: Canada
Posts: 10,777
Thanks: 55
Thanked 6,033 Times in 2,457 Posts
RMerlin is just starting out
Default

No need to clear your settings, unless you already had invalid settings in your nvram to begin with.
__________________
Asuswrt-Merlin: Customized firmware for Asus routers
Github: github.com/RMerl - Twitter: RMerlinDev
See the sticky post for more info.
Reply With Quote
The Following User Says Thank You to RMerlin For This Useful Post:
  #3  
Old 11-29-2012, 03:42 PM
doeboy doeboy is offline
New Member
 
Join Date: Nov 2012
Posts: 2
Thanks: 1
Thanked 0 Times in 0 Posts
doeboy is just starting out
Default

Ok, so I am brand new to this and I have been reading about different custom firmwares. I am going to try this one out on my RT-N66U. My question is do you need to do anything special to flash this (like DD-WRT or Tomato) or is it just like upgrading the official ones?
Reply With Quote
  #4  
Old 11-29-2012, 03:46 PM
RMerlin's Avatar
RMerlin RMerlin is online now
Very Senior Member
 
Join Date: Apr 2012
Location: Canada
Posts: 10,777
Thanks: 55
Thanked 6,033 Times in 2,457 Posts
RMerlin is just starting out
Default

Flashes just like a regular firmware. The only specific cases where you have to additionally reset your settings to factory defaults are:

- If running an RT-N16 with a firmware version lower than 3.x
- If running an RT-N66U with a firmware version lower than 3.0.0.4.220 (unless already running Asuswrt-Merlin)

In both these cases, you should reset to factory defaults before, and after flashing.

But in all cases, you can flash directly through the web interface like a regular Asus firmware.
__________________
Asuswrt-Merlin: Customized firmware for Asus routers
Github: github.com/RMerl - Twitter: RMerlinDev
See the sticky post for more info.
Reply With Quote
  #5  
Old 11-30-2012, 11:31 PM
dazz87 dazz87 is offline
Member
 
Join Date: Nov 2012
Posts: 40
Thanks: 7
Thanked 1 Time in 1 Post
dazz87 is just starting out
Default

Quote:
Originally Posted by RMerlin View Post
Flashes just like a regular firmware. The only specific cases where you have to additionally reset your settings to factory defaults are:

- If running an RT-N66U with a firmware version lower than 3.0.0.4.220 (unless already running Asuswrt-Merlin)

In both these cases, you should reset to factory defaults before, and after flashing.

.
In my case, I dont remember which firmware came with my 66u, but I did do a upgrade to 3.0.0.4.260 (Asus) no reset. I then flash to 3.0.0.4.246.20 (Merlin) again without factory reset. Should I have done a factory reset after flashing to 246.20? Everything is fine, but last night my ipad (5 Ghz) web pages took a long time to load, I eventually had to reboot the tablet to resolve it.
Reply With Quote
  #6  
Old 12-01-2012, 12:10 AM
RMerlin's Avatar
RMerlin RMerlin is online now
Very Senior Member
 
Join Date: Apr 2012
Location: Canada
Posts: 10,777
Thanks: 55
Thanked 6,033 Times in 2,457 Posts
RMerlin is just starting out
Default

Nvram clearing shouldn't be required in this case.
__________________
Asuswrt-Merlin: Customized firmware for Asus routers
Github: github.com/RMerl - Twitter: RMerlinDev
See the sticky post for more info.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 02:08 PM.


Top 10 Stats
Top Posters* Top Thanked
RMerlin  367
john9527  153
azazel1024  109
stevech  100
htismaqe  97
sfx2000  81
L&LD  69
TonyH  59
ColinTaylor  53
AndreyPopov  53
RMerlin  6032
john9527  378
stevech  350
ryzhov_al  279
TeHashX  234
L&LD  232
RogerSC  199
sinshiva  147
sfx2000  133
joegreat  126
Most Viewed Threads* Hottest Threads*
Old Asuswrt-Merli...  16480
Old Brainstorming...  2359
Old RT-AC68P  2283
Old Advice on...  2156
Old Looking for...  2145
Old RT-AC68U...  1551
Old Asus...  1535
Old Issues...  1462
Old AC-68...  1384
Old Does Auto...  1256
Old Asuswrt-Merli...  124
Old Advice on...  49
Old Brainstorming...  47
Old Looking for...  35
Old Stable...  25
Old Issues...  25
Old WiFi Rates  23
Old RT-AC68U...  22
Old Belkin Pre-N...  21
Old Network...  18


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
© 2006-2014 Pudai LLC All Rights Reserved.