After firmware update mkdir command won't run

[ady72]

Hi to all
I've just updated firmware to the latest Merlin's revision 3.0.0.4.270.24.
I try to reach Transmission from the Wan but i wasn't able.
After some test i understand that firewall scripts has been deleted.
I try to edit it again but i wasn't able to create scripts dir in jffs
Read-only file system.

What's the problem?
Try to format jfss partition and redo all?

Thanks to all in advnace

[joegreat]

Originally Posted by ady72

Try to format jfFs partition and redo all?

Hi,

Firmware updates can destroy the JFFS partition as the whole flash memory might be re-partitioned (based on the size of the firmware).

Just re-enable JFFS and also click "format on next reboot" (on the Administration / System page) and it should work again. Maybe you need to enable/disable it more the once - with reboots in between.

By the way:
You posted this into the wrong section. JFFS is only supported in the Merlin version of the firmware - so you post/question should go into the right section of the forum.

With kind regards
Joe