SmallNetBuilder Forums
Go Back   SmallNetBuilder Forums > Wireless Networking > General Wireless Discussion

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-31-2013, 06:54 PM
Fawkesguy Fawkesguy is offline
New Member
 
Join Date: Jan 2013
Posts: 6
Thanks: 2
Thanked 0 Times in 0 Posts
Fawkesguy is just starting out
Default [Solved] dd-wrt x86 on pc....how to add wireless?

Hi there,

I'm guessing this isn't complicated to do - I'm just not sure how to. I'm going to install dd-wrt on an old pc to handle dhcp and OpenVPN. For wireless, I've got a Netgear WNDR4000. I'm not exactly sure how to connect it to the network. eth0 on the pc will be the WAN port and will connect to the cable modem. Now the other NIC, eth1 - do I connect that to the WAN port of the 4000 or a LAN port? Do I set the 4000 to bridge mode? Again, I know this isn't rocket science - I just can't get it straight in my mind. :-). Thanks in advance for the help.

Guy
__________________
"As nightfall does not come at once, neither does oppression. In both instances there is a twilight when everything remains seemingly unchanged. And it is in such twilight that we all must be most aware of change in the air - however slight - lest we become unwitting victims of the darkness."
--Supreme Court Justice William O. Douglas

Last edited by Fawkesguy; 02-03-2013 at 05:54 PM.
Reply With Quote
  #2  
Old 01-31-2013, 08:35 PM
stevech stevech is offline
Very Senior Member
 
Join Date: Mar 2010
Location: San Diego
Posts: 4,850
Thanks: 1
Thanked 351 Times in 339 Posts
stevech is just starting out
Default

Now I'm confused. DD-WRT is firmware that one loads into certain WiFi routers. It's not PC software.

Next: Your PC shouldn't connect directly to the cable/DSL modem. That's a big security risk. The router (as is usual) would go between the cable modem and all PCs, wired or wireless.

The router single or dual band, would have one WAN port to connect to the cable modem.

Or am I just misunderstanding what you wish to do?
Reply With Quote
The Following User Says Thank You to stevech For This Useful Post:
  #3  
Old 01-31-2013, 09:01 PM
Fawkesguy Fawkesguy is offline
New Member
 
Join Date: Jan 2013
Posts: 6
Thanks: 2
Thanked 0 Times in 0 Posts
Fawkesguy is just starting out
Default

Hi,

dd-wrt also comes in an x86 version that can be loaded onto a pc which is what I'm going to do, so my pc will be a router. As an aside, my issue is that my WNDR4000, due to the encryption used by my VPN provider using OpenVPN takes my 50+ Mbps download speed and reduces it to about 5Mbps. It's a huge bottleneck.

So I'm going to take an old pc, load up the x86 version of dd-wrt and run all the services (VPN, DHCP, firewall, etc.) that currently run on my WNDR4000. So what I'm not sure about is how to configure and integrate my wireless router into my network. Do I set it to bridge? Do I use its WAN port or one of its LAN ports to connect? Those are the things I need help with. I hope that clears things up.

x86 dd-wrt:http://www.dd-wrt.com/wiki/index.php/X86

Thanks
Guy
__________________
"As nightfall does not come at once, neither does oppression. In both instances there is a twilight when everything remains seemingly unchanged. And it is in such twilight that we all must be most aware of change in the air - however slight - lest we become unwitting victims of the darkness."
--Supreme Court Justice William O. Douglas
Reply With Quote
  #4  
Old 02-01-2013, 12:15 AM
tipstir tipstir is offline
Very Senior Member
 
Join Date: Aug 2008
Location: South Florida
Posts: 1,627
Thanks: 0
Thanked 35 Times in 35 Posts
tipstir is just starting out
Send a message via AIM to tipstir Send a message via Yahoo to tipstir Send a message via Skype™ to tipstir
Default

Oh boy sounds like fun, but from what I use to do myself trying to run PC as a router always runs into some snags. If you like to experiment and have high hopes that promise of the software will do the job for you?

Then good luck in your decision!
Reply With Quote
  #5  
Old 02-01-2013, 02:22 AM
stevech stevech is offline
Very Senior Member
 
Join Date: Mar 2010
Location: San Diego
Posts: 4,850
Thanks: 1
Thanked 351 Times in 339 Posts
stevech is just starting out
Default

what/where is the VPN server?
Doesn't your PC create the tunnel to some distant end point?
VPN would just pass through the router?
Reply With Quote
  #6  
Old 02-01-2013, 08:59 AM
Fawkesguy Fawkesguy is offline
New Member
 
Join Date: Jan 2013
Posts: 6
Thanks: 2
Thanked 0 Times in 0 Posts
Fawkesguy is just starting out
Default

I'm using AirVPN and can connect to several different servers. Currently dd-wrt is running OpenVPN and my whole network goes through the VPN to access the Internet. Like I said, the slow processor in the router slows things down to a crawl due to VPN encryption overhead.

Let's forget about the pc though. Let's imagine I have a network that has a router that's handling access to the Internet and DHCP. How do you add a wireless access point to that network? Set it up as a bridge? And which port will connect to the router - a LAN or WAN port?
__________________
"As nightfall does not come at once, neither does oppression. In both instances there is a twilight when everything remains seemingly unchanged. And it is in such twilight that we all must be most aware of change in the air - however slight - lest we become unwitting victims of the darkness."
--Supreme Court Justice William O. Douglas
Reply With Quote
  #7  
Old 02-01-2013, 03:20 PM
devnull devnull is offline
Member
 
Join Date: Aug 2012
Posts: 82
Thanks: 0
Thanked 5 Times in 5 Posts
devnull is just starting out
Default

Access points go on the LAN ports. If you have a wireless router and want to turn that into an access point, go here:

http://www.smallnetbuilder.com/wirel...n-access-point

If you haven't already, check out Pfsense. It's a well built router package that installs onto a hard disk easier than a desktop OS. I've been using it for about 4 months now and I'm quite impressed by the variety of features. It also comes in variants that are made to install on embedded systems and flash drives.

It's also got a large number of optional packages to add transparent proxy, proxy with antivirus, IDS/IPS, regional/blacklist blocking and a lot more.
Reply With Quote
The Following User Says Thank You to devnull For This Useful Post:
  #8  
Old 02-01-2013, 04:44 PM
Fawkesguy Fawkesguy is offline
New Member
 
Join Date: Jan 2013
Posts: 6
Thanks: 2
Thanked 0 Times in 0 Posts
Fawkesguy is just starting out
Default

Quote:
Originally Posted by devnull View Post
Access points go on the LAN ports. If you have a wireless router and want to turn that into an access point, go here:

http://www.smallnetbuilder.com/wirel...n-access-point

If you haven't already, check out Pfsense. It's a well built router package that installs onto a hard disk easier than a desktop OS. I've been using it for about 4 months now and I'm quite impressed by the variety of features. It also comes in variants that are made to install on embedded systems and flash drives.

It's also got a large number of optional packages to add transparent proxy, proxy with antivirus, IDS/IPS, regional/blacklist blocking and a lot more.
Thank you for that link, that is perfect! Since I have dd-wrt configured and running already on my wireless router, I'll try that first on my spare PC. I've heard a lot of good things about pfSense so maybe I'll check it out in a VM.
__________________
"As nightfall does not come at once, neither does oppression. In both instances there is a twilight when everything remains seemingly unchanged. And it is in such twilight that we all must be most aware of change in the air - however slight - lest we become unwitting victims of the darkness."
--Supreme Court Justice William O. Douglas
Reply With Quote
  #9  
Old 02-03-2013, 05:56 PM
Fawkesguy Fawkesguy is offline
New Member
 
Join Date: Jan 2013
Posts: 6
Thanks: 2
Thanked 0 Times in 0 Posts
Fawkesguy is just starting out
Default

Thanks again for the link. I've got dd-wrt running on a spare pc and my Netgear router is now just a simple access point, exactly as I wanted.
__________________
"As nightfall does not come at once, neither does oppression. In both instances there is a twilight when everything remains seemingly unchanged. And it is in such twilight that we all must be most aware of change in the air - however slight - lest we become unwitting victims of the darkness."
--Supreme Court Justice William O. Douglas
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


All times are GMT -4. The time now is 06:13 AM.


Top 10 Stats
Top Posters* Top Thanked
RMerlin  362
john9527  153
azazel1024  115
stevech  103
htismaqe  99
sfx2000  81
L&LD  75
TonyH  61
ColinTaylor  53
AndreyPopov  53
RMerlin  6032
john9527  378
stevech  350
ryzhov_al  279
TeHashX  233
L&LD  232
RogerSC  199
sinshiva  147
sfx2000  133
joegreat  126
Most Viewed Threads* Hottest Threads*
Old Shellshock...  27701
Old Asuswrt-Merli...  15840
Old Brainstorming...  2345
Old RT-AC68P  2217
Old Looking for...  2129
Old Advice on...  2112
Old RT-AC68U...  1535
Old Asus...  1509
Old Issues...  1434
Old AC-68...  1355
Old Asuswrt-Merli...  122
Old Advice on...  49
Old Brainstorming...  47
Old Looking for...  35
Old Shellshock...  31
Old Stable...  25
Old Issues...  25
Old WiFi Rates  23
Old RT-AC68U...  22
Old Belkin Pre-N...  21


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
© 2006-2014 Pudai LLC All Rights Reserved.