Access Point mode settings on Tomato

[Quad5Ny]

Can someone point out all the things to change to let a second router act as just another wireless radio (specifically on Toastman's builds)? Edit: I think everything is working, but I would to make sure I didn't miss anything.

So far I've got:

• Disable WAN Port (by checking "Use WAN port for LAN")
• Disable DHCP Server
• Fill in correct IP addresses for Router, Gateway and DNS
• Switch Router from "Gateway Mode" to "Router Mode"
• Connect Ethernet: Main Router LAN1 <-> WAN Second Router (remember WAN is in LAN mode)

Settings I'm unsure about on the Secondary Router:

• DHCP Routes
• Use internal DNS
• NAT loopback
• NAT target
• All the "Tracking / NAT Helpers": FTP, GRE / PPTP, H.323, SIP, RTSP
• Inbound Layer 7

[stevech]

To add a 2nd WIFi radio (AP), you needn't use Tomato. But that's another story.

[Quad5Ny]

Originally Posted by stevech

To add a 2nd WIFi radio (AP), you needn't use Tomato. But that's another story.

I know, but it was already running Tomato from when it was my main router.