SmallNetBuilder Forums
Go Back   SmallNetBuilder Forums > NAS > QNAP

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-08-2013, 04:43 AM
phrehdd phrehdd is offline
New Member
 
Join Date: Feb 2013
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
phrehdd is just starting out
Default QNAP 559 maxing out need to get larger drives

Has anyone replaced their drives in a 559 or similar NAS to expand capacity?

Best I can tell I have to replace one at a time and after all the drives are replaced then expand?

Any help would be appreciated.

I have 559 with 5x2g Samsung drives I am looking at the 3 gig red Western Digital drives. Again any help would be appreciated.

My worry is I don't have (anymore) reasonable ability to back up all of the NAS files but I can live with that and hopefully not lose any files/data.
Reply With Quote
  #2  
Old 02-08-2013, 01:00 PM
travisco_nabisco travisco_nabisco is offline
Member
 
Join Date: Apr 2010
Location: BC, Canada
Posts: 93
Thanks: 3
Thanked 9 Times in 8 Posts
travisco_nabisco is just starting out
Default

I just did a quick look at the QNP NAS user manual online and in the "RAID Management" section QNAP Turbo NAS User Manual are the following steps:


Quote:
Expand Capacity (Online RAID Capacity Expansion)

Scenario

You bought four 250GB hard drives for initial setup of a TS-509 Pro NAS and configured RAID 5 disk configuration with the four hard drives.

A half year later, the data size of the department has largely increased to 1.5TB. In other words, the storage capacity of the NAS is running out of use. At the same time, the price of 1TB hard drives has dropped to a large extent.

Operation procedure

In “Disk Management” > “RAID Management”, select the disk volume for expansion and click “EXPAND CAPACITY”.

Click “Change” for the first hard drive to be replaced. Follow the instructions to proceed.

Tip: After replacing the hard drive, the description field shows “You can replace this drive”. This means you can replace the hard drive to a larger one or skip this step if the hard drives have been replaced already.

Caution: When the hard drive synchronization is in process, do NOT turn off the NAS or plug in or unplug the hard disk drives.

When the description displays “Please remove this drive”, remove the hard drive from the NAS. Wait for the NAS to beep twice after removing the hard drive.

When the description displays “Please insert the new drive”, plug in the new hard drive to the drive slot.

After plugging in the hard drive, wait for the NAS to beep. The system will start rebuilding.

After rebuilding has completed, repeat the steps above to replace other hard drives.

After changing the hard drives and disk rebuilding has completed, click “EXPAND CAPACITY” to execute RAID capacity expansion.

Click “OK” to proceed.

The NAS beeps and starts to expand the capacity.

The process may take from hours to tens of hours to finish depending on the drive size. Please wait patiently for the process to finish. Do NOT turn off the power of the NAS.

After RAID capacity expansion has finished, the new capacity is shown and the status is “Ready”. You can start to use the NAS. (In the example you have 3.7TB logical volume.)

Tip: If the description still shows “You can replace this hard drive” and the status of the drive volume says “Ready”, it means the RAID volume is still expandable.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 02:22 AM.


Top 10 Stats
Top Posters* Top Thanked
RMerlin  472
john9527  191
huotg01  176
stevech  142
System Error...  139
jegesq  130
L&LD  116
hggomes  112
azazel1024  93
RussellInCinc...  61
RMerlin  6874
john9527  651
stevech  372
ryzhov_al  311
L&LD  271
TeHashX  270
RogerSC  208
hggomes  169
sinshiva  156
sfx2000  143
Most Viewed Threads* Hottest Threads*
Old SECURITY:...  18258
Old ASUS...  10383
Old ASUS...  6875
Old ASUS...  6770
Old choose a new...  2769
Old Asuswrt-Merli...  2524
Old Asuswrt-Merli...  2433
Old Bulding...  2222
Old Horrible...  2037
Old Upgraded to...  1726
Old SECURITY:...  74
Old choose a new...  72
Old ASUS...  59
Old Asuswrt-Merli...  45
Old What is dual...  43
Old ASUS...  41
Old Using a UPS...  30
Old ASUS...  29
Old Crazy...  25
Old Dongle LTE...  25


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
© 2006-2015 Pudai LLC All Rights Reserved.