SmallNetBuilder Forums
Go Back   SmallNetBuilder Forums > Wireless Networking > ASUS Wireless > ASUS N Routers & Adapters

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-30-2012, 04:28 PM
asusrocks asusrocks is offline
New Member
 
Join Date: Nov 2012
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
asusrocks is just starting out
Default Remote Access

So I have an iphone and noticed on the AiCloud app i can only access my files on the connected HDD to the n66u. I am assuming there is not an option to view the control panel of the actual router from this app which is fine. I did then decide to visit the HTTPS://xxxxx.asuscomm.com and input my logins in hopes I can reach my router control panel remotely and all I get is a blank screen. Is there something inside the router I need to change to I can remotely access the router? I tried searching on the forums and do not see a DIY or Walk-thru to set up the N66u with remote access. Thanks!
Reply With Quote
  #2  
Old 11-30-2012, 06:57 PM
asusrocks asusrocks is offline
New Member
 
Join Date: Nov 2012
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
asusrocks is just starting out
Default

Can someone provide a link or steps on what I need to do to set up a VPN? I am just looking for a simple vpn since I an new to this type of configuration.
Reply With Quote
  #3  
Old 11-30-2012, 07:51 PM
Hothersale Hothersale is offline
Member
 
Join Date: Oct 2012
Location: Canada
Posts: 37
Thanks: 3
Thanked 4 Times in 3 Posts
Hothersale is just starting out
Default

Quote:
Originally Posted by asusrocks View Post
So I have an iphone and noticed on the AiCloud app i can only access my files on the connected HDD to the n66u. I am assuming there is not an option to view the control panel of the actual router from this app which is fine. I did then decide to visit the HTTPS://xxxxx.asuscomm.com and input my logins in hopes I can reach my router control panel remotely and all I get is a blank screen. Is there something inside the router I need to change to I can remotely access the router? I tried searching on the forums and do not see a DIY or Walk-thru to set up the N66u with remote access. Thanks!
Have you turned on "Enable Web Access from WAN" in the Administration settings under the System tab? After you've done that, you go to http://xxxxx.asuscomm.com:8080 to access the router control panel. (Where xxxxx is the name you chose when setting up AiDisk, and assuming you didn't change the default port, 8080.)
Reply With Quote
  #4  
Old 11-30-2012, 09:38 PM
Chuck2's Avatar
Chuck2 Chuck2 is offline
New Member
 
Join Date: Nov 2012
Location: BMG, IN USA
Posts: 24
Thanks: 12
Thanked 0 Times in 0 Posts
Chuck2 is just starting out
Default

Quote:
Originally Posted by asusrocks View Post
Can someone provide a link or steps on what I need to do to set up a VPN? I am just looking for a simple vpn since I an new to this type of configuration.
"Procedure (from IBM)
1. Access your router's Web-based setup page and sign in with the administrator user ID and password. If you do not know how to access your router's setup page as an administrator, refer to your router's documentation.
2. Determine whether your network uses DHCP (dynamic) addresses.
o If you have a dynamic network, determine the DHCP IP address range that the DHCP server uses. The location of this information varies by manufacturer, but it will probably be on an advanced networking page.
If you cannot find this information, see your DHCP server's documentation to determine where it is shown.
o If you have a static network, choose a set of IP addresses that are not in use.
3. If your network uses DHCP, choose IP addresses that are not in the dynamic range but are in the same subnet.
Example: You have a DHCP range and a subnet mask
Assume you have DHCP range 192.168.254.1 - 192.168.254.99 and subnet mask 255.255.255.0
The subnet is represented by the parts of the IP address that correspond to the mask parts that are 255. For this example, the subnet is 192.168.254.nnn.
For the virtual client IP addresses, you could choose any addresses that are not already in use in the form 192.168.254.nnn, where nnn is between 100 and 254.
Example: You have the DHCP range and a subnet mask, and do not have a static range
Assume you have DHCP range 192.168.0.2 - 192.168.0.254, and subnet mask 255.255.255.0. In this example, your DHCP server or router is using DHCP address 192.168.0.1.
The subnet is represented by the parts of the IP address that correspond to the mask parts that are 255. For this example, the subnet is 192.168.0.nnn.
This DHCP server does not automatically have a range of static IP addresses. In this case, you would have to modify the DHCP range to create a range of virtual client IP addresses. You could change the DHCP range to 192.168.0.10 - 192.168.0.254. Then for your virtual client IP addresses, you could choose addresses in the form 192.168.0.nnn, where nnn is between 2 and 9."
I have not used this procedure yet as I don't have a static IP address. If some one has a better procedure, please post so I can use it too.
Reply With Quote
  #5  
Old 01-25-2013, 06:33 AM
anthonymike721 anthonymike721 is offline
New Member
 
Join Date: Jan 2013
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
anthonymike721 is just starting out
Default

Why would you like to access your router? Why not computer connected to router? I don’t think there is any program by which one can remotely access a router. I have heard remotely accessing computers through router using various tools such as gosupportnow, Logmeinrescue, GoToMyPC etc. People even access computers remotely by deploying on premise RHUB or Bomgar remote support appliances.
Reply With Quote
Reply

Tags
cloud computing

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 07:01 AM.

Top 10 Stats
Top Posters* Top Thanked
RMerlin  401
stevech  156
thelonelycode...  148
L&LD  126
azazel1024  119
KGB7  86
jim769  80
DrTeeth  69
Adamm  64
speedingcheet...  61
RMerlin  4487
stevech  275
ryzhov_al  199
TeHashX  194
RogerSC  166
L&LD  163
joegreat  105
jlake  102
PrivateJoker  93
sinshiva  88
Most Viewed Threads* Hottest Threads*
Old Asuswrt-Merli...  31950
Old Asuswrt-Merli...  24137
Old ASUS...  22772
Old Beta Version...  17535
Old 'Heartbleed'...  14322
Old Linksys...  9438
Old Potential...  7940
Old Asus-Merlin...  7112
Old Groundhog...  6430
Old Linksys...  5764
Old Asuswrt-Merli...  220
Old Asuswrt-Merli...  179
Old Linksys...  144
Old ASUS...  125
Old Beta Version...  112
Old Potential...  98
Old Linksys...  79
Old Groundhog...  49
Old Asus router...  43
Old USB drive...  39



Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
© 2006-2014 Pudai LLC All Rights Reserved.