tipstir
12-06-2008, 11:54 AM
Okay here you have it...
http://members.cox.net/tipstir/Networking/Network.jpg
Everything is connected now..(2 more has to be wired only) N is now active only 50%, soon to make that 75% mostly controlled by DIR-655 on 2x wireless laptops running N. The other 50% is G. All 1x print server, MediaMVP are connected individually at 100mbps. That's why you see two NETGEAR 8-port 100mbps Switches supports 7x network media players and 5x wireless G devices. Had to go with 2x NETGEAR FS608 v3 switches because the Linksys 8-port switch got hot to the touch.
Trendnet 1000mbps 8-port switch for 2x servers OS and 2x desktop OS
DIR-655 A3 1.11 firmware
Channel: 6
Mix Mode: N/G
SSID: Different
Auto 20/40Hz
Best Speed
AP1 (Access Point) using DD-WRT firmware
Channel: 11
Mode: G Only
SSID: Different than the router
Speed: 54
Wired LAN connection to DIR-655
AP2 (Access Point) using DD-WRT firmware
Channel: 11
Mode: G Only
SSID: Different than the router
Speed: 54
Wired LAN connection to DIR-655
Note this connects directly to a Wireless Client Bridge Below:
CB3 (Client Bridge) using DD-WRT firmware
Channel: 11
Mode: G Only
SSID: Same as the DIR-655
Speed: 54
100% Wireless NO!! wired LAN connection to DIR-655
Mixed Wireless Environment @ 2.4xxxGHz
Wireless N clients show link signal at 96-100% average low is 60mbps and average high is 120mbps
Wireless G clients show link signal at 100% average low is 48mbps and average high is 54mbps
I am going to need to get another AP for N to keep the link signal at 100% solid on the upper floors and bring in gig lines on those floors too. 1st floor has gig connects.
http://members.cox.net/tipstir/Networking/Network.jpg
Everything is connected now..(2 more has to be wired only) N is now active only 50%, soon to make that 75% mostly controlled by DIR-655 on 2x wireless laptops running N. The other 50% is G. All 1x print server, MediaMVP are connected individually at 100mbps. That's why you see two NETGEAR 8-port 100mbps Switches supports 7x network media players and 5x wireless G devices. Had to go with 2x NETGEAR FS608 v3 switches because the Linksys 8-port switch got hot to the touch.
Trendnet 1000mbps 8-port switch for 2x servers OS and 2x desktop OS
DIR-655 A3 1.11 firmware
Channel: 6
Mix Mode: N/G
SSID: Different
Auto 20/40Hz
Best Speed
AP1 (Access Point) using DD-WRT firmware
Channel: 11
Mode: G Only
SSID: Different than the router
Speed: 54
Wired LAN connection to DIR-655
AP2 (Access Point) using DD-WRT firmware
Channel: 11
Mode: G Only
SSID: Different than the router
Speed: 54
Wired LAN connection to DIR-655
Note this connects directly to a Wireless Client Bridge Below:
CB3 (Client Bridge) using DD-WRT firmware
Channel: 11
Mode: G Only
SSID: Same as the DIR-655
Speed: 54
100% Wireless NO!! wired LAN connection to DIR-655
Mixed Wireless Environment @ 2.4xxxGHz
Wireless N clients show link signal at 96-100% average low is 60mbps and average high is 120mbps
Wireless G clients show link signal at 100% average low is 48mbps and average high is 54mbps
I am going to need to get another AP for N to keep the link signal at 100% solid on the upper floors and bring in gig lines on those floors too. 1st floor has gig connects.